Nortel CC MIS Getting Started Manual page 94

CC MIS
CC MIS
Reports
For example:
Output To:
This field specifies where the report is to be sent. Selections can include
printer, screen, file, or an e-mail/fax destination. If a file destination is se-
lected, the File Name field is displayed. If an e-mail/fax destination is se-
lected, a Destination field is displayed. (The destination address must be
entered in this field.)
Note: Graphical reports cannot be e-mailed or faxed.
Page 9-6
A NAP supervisor in Location 1 requests a previous interval report at 1700
EST. There are three nodes in the virtual network for this NAP; the first
in Location 2, the second in Location 3 and the third in Location 4.
Interval time frame reports allow the Network View option to be selected.
Network View enabled: The data from the previous interval relative to the
local time of each node will be returned.
Node NAP
Time zone EST
Local time 1700
Time requested 1630 - 1700
Interval returned
Network View disabled: The data from the (1630 - 1700) interval in each
time zone will be returned. In this example, this interval has not yet oc-
curred in Locations 3 or 4, therefore no data will be returned by these
nodes.
Node NAP
Time zone EST
Local time 1700
Time requested 1630 - 1700
Interval returned
The shaded areas indicate time ranges that have not occurred as of 1700
EST. No data will be returned by those nodes. The data from all nodes
will be available as soon as the earliest time zone (in this case, PST)
has completed the requested interval.
Location 2 Location 3
EST CST
1700 1600
1630 - 1700 1530 - 1600
34 32
(1630 - 1700) (1530 - 1600)
Location 2 Location 3
EST CST*
1700 1600
1630 - 1700 1630 - 1700
34 34
(1630 - 1700) (1630 - 1700)
CC MIS Getting Started Guide (297-2671-175)
Release 5.2
Location 4
PST
1400
1330 - 1400
28
(1330 - 1400)
Location 4
PST*
1400
1630 - 1700
34
(1630 - 1700)