Playing Audio Sources (Cds And Dvds) 2-Channel Playback Modes - Denon AVR-4806 Operating Instructions Manual

PURE DIRECT DIRECT/STEREO
Playing audio sources (CDs and DVDs)
2-channel playback modes
• The AVR-4806 is equipped with three 2-channel playback
modes exclusively for music.
• Select the mode to suit your tastes.
2 PURE DIRECT mode
This mode reproduces the sound with extremely high
quality. When this mode is set, all circuits and processes
not required for the selected input source (FL tube, video
circuit and tone control, as well as digital circuitry and other
unnecessary circuits for analog audio inputs) are
automatically turned off so the music signals can be
reproduced with high sound quality.
PURE DIRECT
Press the
DIRECT mode.
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound. In
this mode, the audio signals bypass such circuits as the
tone circuit and are transmitted directly, resulting in good
quality sound.
DIRECT/STEREO
Press the
DIRECT mode.
The mode switches as shown below each time the
DIRECT/STEREO button on the main unit is pressed.
DIRECT
button to select the PURE
button to select the
STEREO
PURE DIRECT
2 STEREO mode
Use this mode to adjust the tone and achieve the desired
sound.
DIRECT/STEREO
Press the
STEREO mode.
• The system setup function cannot be used when the PURE
DIRECT mode is set. To use the system setup function,
cancel the PURE DIRECT mode.
• If the HDMI input terminal is selected, video outputs are
outputted in the PURE DIRECT mode.
• The channel level and surround parameters in the PURE
DIRECT mode are the same as in the DIRECT mode.
49
Basic Operation
SURROUND
DIRECT
STEREO
button to select the