Surround; Playing Audio Sources (Cds And Dvds) 2-Channel Playback Modes; Dolby Pro Logic Ii Mode - Denon AVR-1306 Operating Instructions Manual

ENGLISH
Basic Operation
2 Input mode display
• In the AUTO mode
• In the DIGITAL PCM mode
• In the DIGITAL DTS mode
• In the ANALOG mode
2 Input signal display
• DOLBY DIGITAL
The "DIGITAL" indicator lights
when digital signals are being input
• DTS
properly. If the "DIGITAL" indicator
does not light, check whether the
Digital In Assignment setup (
page 15) and connections are correct
and whether the component's
• PCM
power is turned on.
NOTE:
• The "DIGITAL" indicator will light when playing CD-ROMs
containing data other than audio signals, but no sound will
be heard.
Depending on the input signal.

Surround

Playing audio sources (CDs and DVDs)
2-channel playback modes
• The AVR-1306 is equipped with 2-channel playback modes
exclusively for music.
• Select the mode to suit your tastes.
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and are transmitted directly, resulting
in good quality sound.
Press the
DIRECT
or the
select the DIRECT mode.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound
while watching images.
Press the
STEREO
or the
select the STEREO mode.
STANDARD
DIRECT/STEREO
SURROUND PARAMETER SELECT
DIRECT/STEREO
button on the main unit
button on the remote control unit to
DIRECT/STEREO
button on the main unit
button on the remote control unit to
19
ENGLISH
STANDARD
DIRECT
ENTER
CURSOR F
II
Dolby Pro Logic mode
1
STANDARD
Press the button to select the Dolby
Pro Logic II mode.
II
• The Dolby Pro Logic indicator lights.
Lights
The mode switches as shown below each time the button
is pressed.
DOLBY PL II DTS NEO:6
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
Basic Operation
STEREO
SURROUND
PARAMETER
CURSOR G
button to