Setting The Back Light's Lighting Time; Setting The Brightness; Resetting - Denon AVR-4806 Operating Instructions Manual

Advanced Operation
OFF
CHANNEL

Setting the back light's lighting time

1
ON OFF
Press the and
2 5
Press the button to select Light setup.
3 Press the button you want to adjust the
lighting time (5 sec ~ 20 sec).
2 Lighting time
1 : 5 sec
2 : 10 sec (factory default)
3 : 15 sec
4 : 20 sec

Setting the brightness

• The brightness of the display can be adjusted in 3 levels.
2 For 1 brightness step increase
ENTER
Hold the button and press the
button.
2 For 1 brightness step decrease
ENTER
Hold the button and press the
button.
ON
MODE SELECTOR
NUMBER
ENTER
button at the same time.
CHANNEL +
CHANNEL –

Resetting

2 Resetting the preset memory
1 ON
Press the and
2
6
Press the button to select resetting.
3
1
Press the button to resetting the preset
memory.
2 Resetting List
1 : Resetting the preset memory
2 : Resetting the "Learned" buttons
3 : Resetting the system call
4 : Resetting the punch through setting
+10 : All reset function (factory default)
• The MODE SELECTOR buttons that were set in preset
memory will all light.
4
MODE SELECTOR
Press the
resetting, then press the
• The set returns to the normal operating mode.
2 Resetting the learned buttons
1 ON
Press the and
2 6
Press the button to select resetting.
3
2
Press the button to resetting the learned
buttons.
• The MODE SELECTOR buttons will all light.
4
MODE SELECTOR
Press the
resetting, then press the
• The set returns to the normal operating mode.
78
OFF
button at the same time.
button you want to
ENTER
button.
OFF
button at the same time.
button you want to
ENTER
button.