Denon AVR-4806 Operating Instructions Manual page 79

2 Resetting the system call buttons
1 ON
Press the and
2 6
Press the button to select resetting.
3
3
Press the button to resetting the system call
buttons.
• All buttons of system call will light.
4
MODE SELECTOR
Press the
resetting, then press the
• The set returns to the normal operating mode.
2 Resetting the punch through setting
1 ON
Press the and
2
6
Press the button to select resetting.
3
4
Press the button to resetting the punch
through setting.
• All punched through mode buttons will light.
4
MODE SELECTOR
Press the
resetting, then press the
• The set returns to the normal operating mode.
OFF
button at the same time.
button you want to
ENTER
button.
OFF
button at the same time.
button you want to
ENTER
button.
2 All reset function
1 ON
Press the and
2 6
Press the button to select resetting.
3
+10
Press the button.
• Clear the entire system memory, which will restore
the remote control unit to the factory default
settings. This operation will take approximately 20
seconds.
Only use this if you wish to clear all customized
settings and memories and restore the unit to its out-
of-the-box factory default settings.
79
Advanced Operation
OFF
button at the same time.