Surround; Playing Audio Sources (Cds And Dvds) 2-Channel Playback Modes; Dolby Pro Logic Ii X (Pro Logic Ii ) Mode - Denon AVR-1906 Operating Instructions Manual

ENGLISH
Basic Operation
STANDARD DIRECT/STEREO
SURROUND PARAMETER

Surround

Playing audio sources (CDs and DVDs)
2-channel playback modes
• The AVR-1906 is equipped with 2-channel playback modes
exclusively for music.
• Select the mode to suit your tastes.
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and are transmitted directly, resulting
in good quality sound.
DIRECT/STEREO
Press the button on the main unit
DIRECT
or the button on the remote control unit to
select the DIRECT mode.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound
while watching images.
DIRECT/STEREO
Press the button on the main unit
STEREO
or the button on the remote control unit to
select the STEREO mode.
STANDARD
DIRECT
ENTER
SELECT
Dolby Pro Logic
• To play in the PL II x mode, set "S. BackSp" at the "Speaker
Configuration" setting to "1sp" or "2sp".
• To play in the PL II x mode, set "Surround Back" at the "Power
Amp Assign." setting.
1
STANDARD
Press the
II
Pro Logic x mode.
• The Dolby Pro Logic
The mode switches as shown below each time the
STANDARD button is pressed.
DOLBY PL
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
3 SURROUND PARAMETER
Press the
select the surround parameter mode.
STEREO
SURROUND
PARAMETER
CURSOR
II x (Pro Logic II ) mode
button to select the Dolby
II indicator lights.
Lights
II
x DTS NEO:6
button to
21
ENGLISH
4
SELECT
Turn the knob, and press the
F F G G
or button to select the optimum mode for
the source.
When the "SB CH OUT" parameter is set to "ON". (Set "S.
BACK" at system setup to "SMALL" or "LARGE".)
Display
(Pro Logic
(Pro Logic
(Pro Logic
When the "SB CH OUT" parameter is set to "OFF". (Set
"S. BACK" at system setup to "NONE".)
Display
(Pro Logic
(Pro Logic
(Pro Logic
(Dolby Pro Logic mode)
5
SURROUND PARAMETER
Press the
CURSOR D D H H
press the or button to select the
various parameters.
See "Surround parameters q" for a description of the various
parameters.
Basic Operation
CURSOR
II x Cinema mode)
II
x Music mode)
II x Game mode)
II
Cinema mode)
II Music mode)
II Game mode)
button, and