Denon AVR-4806 Operating Instructions Manual page 117

3
CURSOR
Press the
"Surr. Sp.", then press the
button to select the surround speaker(s) from
which you want to produce the test tone (A, B
or A+B).
Surr. Sp. : A
Adjusts the balance of the playback level between
the channels when using surround speaker A.
Surr. Sp. : B
Adjusts the balance of the playback level between
the channels when using surround speaker B.
Surr. Sp. : A + B
Adjusts the balance of the playback level between
the channels when using surround speakers A and
B at the same time.
The "Surr. Sp." can only be selected when both
surround speakers A and B have been selected at the
System Setup Menu (when both A and B have been
set to "Large" or "Small").
4
CURSOR
Press the
"Test Tone Start", then press the
button to select the "Yes".
5
When "Auto" mode is selected:
CURSOR
Press the
-1
the speakers to the same volume.
• The test tones are emitted from each speaker in the
following order, at 4-second intervals the first time
and second time around, 2-second intervals the third
time around and on:
FL
SW
When the surround back speaker setting is set to
"1spkr" for "Speaker Configuration", this is set to
"SB".
D D or H H button to select the
CURSOR F F or G G
D D or H H button to select the
CURSOR
F F or G G button to adjust all
C FR SR
2spkrs
SL SBL SBR
SB
1spkr
Example: When the volume is set to –11.5 dB while
the test tone is being produced from the
Front Lch speaker
The volume can be adjusted between –12 dB and +12
dB in units of 0.5 dB.
5
When "Manual" mode is selected:
CURSOR
Press the
-2
speaker, then press the
to adjust all the speakers to the same volume.
Example: "Manual" mode is selected.
F F
6
ENTER
Press the
• The "Channel Level" screen reappears.
• To cancel the settings, press the CURSOR H H button to select
the "Level Clear" and "Yes" on the "Channel Level" screen,
then make the settings again.
117
Advanced Setup – Part 2
D D or H H button to select the
CURSOR F F or G G button
button to enter the setting.