Setting The Manual Eq Setup - Denon AVR-4806 Operating Instructions Manual

Setting the Manual EQ Setup

• Allows you to adjust the tonal quality of the various speakers
(except the subwoofer) while listening to a music source.
1
CURSOR
Press the
"Manual EQ Setup" at the "Advanced
Playback" menu, then press the
• Display the "Manual EQ" screen.
2
CURSOR
Press the
adjustment mode, then press the
button.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers
can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3
CURSOR
Press the
speaker to be set.
Example: When "L/R CH" is selected.
The display changes as follows.
q
Select the "L/R CH"
FL/FR
SBL/SBR
D D or H H button to select the
ENTER
button.
F F or G G button to select the
ENTER
F F or G G button to select the
C SLA/SRA
SL/SR A+B SLB/SRB
w
Select the "Each CH"
FL FR
SBR SBL
SB
1spkr
When the surround back speaker setting is set to
"1spkr" at "Speaker Configuration", this is set to
"SB".
e
Select the "All CH"
In this case, speaker selection is not performed.
If a value is already set for the FL channel, the data
stored for the FL channel is displayed.
4
CURSOR
Press the
frequency, then press the
button to adjust the gain level.
Each frequency can be adjusted the range from –20 dB
to +6 dB in 0.5 dB step.
5
ENTER
Press the
• The "Manual EQ" screen reappears.
6
CURSOR
Press the
"Exit", then press the
• The "Advanced Playback" menu reappears.
103
Advanced Setup – Part 1
C SLA SRA SLB
SR A+B SL A+B SRB
D D or H H button to select the
CURSOR F F or G G
button to enter the setting.
D D or H H button to select the
ENTER
button.