Operating A Component Stored In The Preset Memory - Denon AVR-4806 Operating Instructions Manual

4
Referring to the included List of Preset Codes,
NUMBER
press the
4-digit number) for the manufacturer of the
component whose signals you want to store in
the memory.
• "OK" is displayed when the signals are registered
and the mode is terminated.
"FAIL" is displayed when the signals are not
registered, repeat steps 1 to 4.
5
To store the codes of another component in the
memory, repeat steps 1 to 5.
NOTE:
• Depending on the model and year of manufacture, this
function cannot be used for some models, even if the
your device is listed on the included list of preset codes.
• Some manufacturers use more than one type of remote
control code. Refer to the included list of preset codes to
change the number and check it out.
2
The preset codes are as follows upon shipment from the
factory and after resetting:
• TV, VCR1 ...........................................HITACHI
• CD, CDR, VDP, DVD, DVDR ..............DENON
• VCR2, DBS ........................................SONY
DVD preset codes
DENON Model No.
to input the preset code (a
0000
0517
(default)
DVD-555
DVD-800
DVD-755 DVD-1600
DVD-900 DVD-2000
DVD-910 DVD-2500
DVD-955 DVD-3000
DVD-1000 DVD-3300
DVD-1200
DVD-1500
DVD-1710
DVD-1910
DVD-2200
DVD-2800
DVD-2800 II
DVD-2900
DVD-2910
DVD-3800
DVD-3910
DVD-5900
DVD-5910
DVD-9000
DVM-715
DVM-1800
DVM-1805
DVM-1815
DVM-2815
DVM-4800
Operating a component stored in the
preset memory
1
MODE SELECTOR
Press the
component you want to operate.
2
Operate the component.
For details, refer to the component's operating
instructions.
Some models cannot be operated with this remote
control unit.
• For the DVD player remote control buttons, function names
may differ according to manufacturer. Compare with the
remote control operation of the various components.
73
Advanced Operation
button for the