Setting The Digital Out Assignment; User Memory - Denon AVR-4806 Operating Instructions Manual

Setting the Digital Out Assignment

• The optical digital output connectors on the AVR-4806's rear
panel (OPTICAL2 to 4 OUT) normally function in association
with the ZONE3/REC SELECT mode. With this setting, the
OPTICAL 2 OUT connector can be used in association with
the ZONE2 SELECT mode.
1
CURSOR
Press the
"Digital Out Assign" at the "Option Setup"
menu, then press the
• Display the "Digital Out Assign" screen.
2
CURSOR
Press the
whether to associate the OPTICAL2 OUT
connector to the "ZONE3/REC SELECT" or
"ZONE2 SELECT" mode.
3
ENTER
Press the
• The "Option Setup" menu reappears.
D D or H H button to select the
ENTER
button.
F F or G G button to select
button to enter the setting.

User Memory

• The currently set settings (system setup, surround
parameters, etc.) can be stored in the memory. The stored
settings can be called out when needed.
1
CURSOR
Press the
"Setup Memory / Lock" at the "Option Setup"
menu, then press the
• Display the "Setup Memory / Lock" screen.
2
CURSOR
Press the
"User Memory", then press the
• Switch to the "User Memory" screen.
3 CURSOR
Press the
• About 30 seconds are required for the settings to be
stored in the memory.
Once the settings are stored in the memory, "Load" is
displayed and the settings can be loaded.
4
CURSOR
Press the
"Exit", then press the
• Return to the "Setup Memory / Lock" screen.
111
Advanced Setup – Part 1
D D or H H button to select the
ENTER
button.
D D or H H button to select the
ENTER
button.
F F button to select the "Yes".
D D or H H button to select the
ENTER
button.