Tp Search; Rt (Radio Text) - Denon AVR-4806 Operating Instructions Manual

TP search

• Use this function to find RDS stations broadcasting traffic
program (TP stations).
1
Set the input source to "TUNER".
(Main unit) (Remote control unit) (Remote control unit)
2 RDS
Press the button until "TP SEARCH"
appears on the display.
The main unit's display switches as follows each time
the RDS button is pressed.
Display
RDS SEARCH
RT ON
3
CHANNEL
Press the
• Automatically begin the TP search operation.
If no TP station is found with above operation, all the
reception bands are searched.
The station name is displayed on the display after
searching stops.
4
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies
are searched, "NO PROGRAMME" is displayed.
PTY SEARCH
TP SEARCH
button.

RT (Radio Text)

• "RT" appears on the display when radio text data is
received.
1
Set the input source to "TUNER".
(Main unit)
2 RDS
Press the
on the display.
The main unit's display switches as follows each time
the RDS button is pressed.
Display
RDS SEARCH
RT ON
While receiving an RDS broadcast station, the text
data broadcast from the station is displayed.
To turn the display off, press the CURSOR F F or G G
button.
If no text data is being broadcast, "NO TEXT DATA" is
displayed.
69
Basic Operation
(Remote control unit) (Remote control unit)
button until "RT ON" appears
PTY SEARCH
TP SEARCH