Playing The Input Source - Denon AVR-4806 Operating Instructions Manual

FUNCTION
SOURCE HOME THX
CINEMA

Playing the input source

1
Select the input source to be played.
Example: CD
(Main unit) (Remote control unit) (Remote control unit)
To select the input source when ZONE2 SELECT,
ZONE3/REC SELECT or TUNING PRESET is selected,
press the SOURCE button on the main unit then operate
the input function selector.
2
Start playback on the selected component.
For operating instructions, refer to the component's
manual.
3
Adjust the volume.
(Main unit)
M.VOL. -80.0dB
The volume level is displayed on the master volume
level display.
VOLUME
SOURCE
FUNCTION
ROOM EQ
ROOM EQ
(Remote control unit)
43
VOLUME
The volume can be adjusted within the range of –80 to
+18 dB, in steps of 0.5 dB. However, when the
channel level is set (
the volume for any channel is set at +0.5 dB or greater,
the volume cannot be adjusted up to 18 dB. (In this
case the maximum volume adjustment range is "18 dB
— (Maximum value of channel level)".)
2 To choose the surround sound mode
Example: THX Surround EX
SURROUND
Press the
THX CINEMA
button.
For more information about the surround modes (
page 50, 51).
2 To select the Room EQ function
ROOM EQ
Press the button.
For more information about the Room EQ function
( page 47).
Basic Operation
SURROUND
HOME THX
CINEMA
page 64, 65 or 116 ~ 118), if
HOME
button, then press the