Remote Control Unit Operations During Multi-Source Playback - Denon AVR-4806 Operating Instructions Manual

Remote control unit operations during
multi-source playback
1
Select the zone which you want to operate
MODE SELECTOR
pressing the
Example: ZONE2
2
SOURCE ON
Press the
zone power.
Press the SOURCE OFF button to turn off the zone
power.
3
Select the input source you wish to output.
4 The volume of the outputs of the different
zones can be adjusted with the
button on the remote control unit.
The output level can be controlled only if the zone
volume level is set "variable" at "Volume Control" in
the "System Setup Menu" (
DEFAULT VOLUME SETTING
ZONE2 : –40 dB
ZONE3 : –40 dB
The zone volume can be adjusted within the range of
–80 to 18 dB, in steps of 1 dB.
• Press the MUTING button to mute the audio temporarily.
The muting level is same as set with "Volume Control".
• Cancelling muting mode:
Press the MUTING button again, or press the VOLUME button
on the remote control unit.
buttons.
(Remote control unit)
button to turn on the
VOLUME
page 108).
83
Advanced Operation