Basic Operation; Playback; Operating The Remote Control Unit - Denon AVR-4806 Operating Instructions Manual

Basic Operation

Playback

Operating the remote control unit

• The RC-995 remote control has a backlit LCD screen whose
contents change according to the mode or function selected,
with the appropriate remote commands for that mode or
function.
2 Operate the this unit
AMP
The button is the main mode for controlling
the AVR-4806 in the main room (MAIN ZONE).
The function switches as shown below each time one of
the MODE SELECTOR buttons is pressed.
AMP/Z2 : AMP, ZONE2
Z3/Z4 : ZONE3, ZONE4*
(* : This mode can not be used with the AVR-4806.)
2 SOURCE MENU
To operate the system's source components.
SOURCE
Press the button to display
the screen shown below, to that you
can select an input source.
2 SURROUND MENU
To select specific surround modes.
SURROUND
Press the
display the screen below to choose a
specific surround mode.
2 NUMBER/SYSTEM CALL MENU
Operate the "Number/System call" menu function.
NUMBER/SYSTEM CALL
Press the
button to display the screen below.
• This function provides the ability to program a series of
individual remote control codes into a macro stored under
one of the number pad's numeric choices (
75).
42
button to
page 70 ~