Connecting Other Sources; Cable Indications - Denon AVR-4806 Operating Instructions Manual

Connecting Other Sources

Cable indications

• The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
Audio cable
A
Analog terminal (Stereo)
(White)
L
(Red)
R
B
Analog terminal (Monaural, for subwoofer)
C
Digital terminal (Coaxial)
(Orange)
Coaxial cable (75 Ω/ohms pin-plug cable)
D
Digital terminal (Optical)
Optical cable (Optical fiber cable)
E
DENON LINK terminal
DENON LINK cable
F
IEEE1394 terminal
4-pin, S400 IEEE1394 cable
G
Speaker terminal
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Note that binding pin-plug cables together with power supply cords or placing them near a power transformer will result
in generating hum or other noise.
NOTE:
• Connecting a LD (laser disc) player with a Dolby Digital RF Output
The AVR-4806 does not have a DD RF demodulator function. Therefore, you need to use a commercially available outboard
DD RF demodulator and connect its digital output to one of the AVR-4806 available digital inputs. Refer to the demodulator's
owner's manual for further information.
L
R
Pin-plug cable
Pin-plug cable
Speaker cable
Video cable
H
Video terminal
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
I
S-Video terminal
J
Component video terminal
(Green)
(Blue)
(Red)
Component video cable
K
DVI-D terminal
Audio and Video cable
L
HDMI terminal
Signal direction
Audio signal
Video signal
26
S-Video cable
24-pin DVI-D cable
HDMI cable
IN OUT OUT
IN OUT OUT
(Y)
(P /C )
B B
(P /C )
R R
IN
IN