Setting The On Screen Display (Osd) - Denon AVR-4806 Operating Instructions Manual

Advanced Setup – Part 1

Setting the On Screen Display (OSD)

• Use this to turn the on screen display (messages other than
the menu screens) on or off.
• Sets the on screen display's display mode.
1
CURSOR
Press the
"On Screen Display" at the "Video Setup"
menu, then press the
• Display the "On Screen Display" screen.
2
CURSOR
Press the
item to be set, then press the
button to select the parameter.
Function/Mode Status:
Set whether or not to turn on the on screen display
of the input source name and input mode when an
input source is selected.
Master Volume Status:
Set whether or not to turn on the on screen display
of the main volume level when the main volume is
operated.
Display Mode:
• Mode 1:
Prevents flickering of the on screen display when
there is no video signal.
• Mode 2:
Flickering is not prevented.
Use this mode if the on screen display does not
appear in the Mode 1, as may happen according to
the TV being used.
3
ENTER
Press the
• The "Video Setup" menu reappears.
D D or H H button to select the
ENTER
button.
D D or H H button to select the
CURSOR
F F or G G
button to enter the setting.
4
CURSOR
Press the
"Exit", then press the
• The "System Setup Menu" reappears.
100
D D or H H button to select the
ENTER
button.