Admin Guide > Automatic Routing and PBX Integration
Use the Total String Length field to enter the number of digits the PBX passes in the
complete string, including the mailbox ID.
Use the Number of Mailbox ID Digits field to enter the number of digits used in the
mailbox ID. The FaxPress supports up to 7 digits for the Mailbox ID, although Mailbox IDs
are more commonly 3 or 4 digits.
Use the Starting Position field to enter the mailbox ID's starting position in the string,
i.e. whether it's positioned at the beginning, in the middle, or at the end of the string.
Use the Mask Value field to enter the entire digit string passed by your PBX system or
DID trunk line. Use DDDD to represent the digits the FaxPress will use for the Mailbox
ID, and X to represent the unnecessary digits the FaxPress will strip. The FaxPress
supports up to 7 digits for the Mailbox ID, although Mailbox IDs are more commonly 3 or
4 digits.
In the Incoming Faxes section, the Administrator and Unaddressed radio buttons
allow you to specify the destination for incoming faxes that are either misaddressed or
without a recognizable mailbox ID.
FaxPress Administrator Guide
85