Table of Contents
Advertisement
To confirm that the FaxPress is able to communicate using TCP/IP:
the FaxPress server must be assigned an IP address.
the FaxPress client must be set to use TCP/IP as the default network protocol, a
selection made during the client setup.
the FaxPress must be able to successfully send and receive test faxes.
To assign the FaxPress Server an IP address, follow these steps:
1.
On a Windows 95/98, Me, NT, 2000/2003 or Vista workstation with the FaxPress
client for Administrators installed, launch the FaxPress Configurator for IPX/
SPX. (
Start>Programs>FaxPress>Administration Tools> FP
Configurator for IPX/SPX
2.
In the FaxPress Configuration (IPX protocol) window, enter your FaxPress
Server's serial number, click Show Settings, then IP settings.
FaxPress Administrator Guide
Admin Guide > Installing the FaxPress Client on Terminal Server
)
482
Advertisement
Table of Contents
