Setting The Tray Use For Fax Mode; Setting The Lcd Contrast - Brother MFC-8440 User Manual

Brother mfc-8440: users manual

Hide thumbs Also See for MFC-8440:

Table of Contents

Setting the Tray Use for Fax mode

If your MFC doesn't have the optional tray #2, you can skip this setting.

The default setting of Auto allows your MFC to choose the optional

Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on

the paper in Tray #2.

Only , Tray#2 Only , or Auto .

If Auto Reduction is turned on, incoming faxes will be printed

from the tray that is set for Auto Reduction. (See Printing a

reduced incoming fax (Auto Reduction) on page 5-5.)

You can change the contrast to help the LCD look lighter or darker.

(MFC-8840D/8840DN)

If you have the optional tray #2, press

to increase the contrast.

to decrease the contrast.

4 - 12 GETTING STARTED

to select Tray#1

18.Tray Use: Fax

19.LCD Contrast