Fax Resolution - Brother MFC-8440 User Manual

6
Start
Press
The MFC starts scanning the first page.
If you are using the scanner glass, go to Step 7.
7
To send a single page, press
The MFC starts sending the original.
—OR—
To send more than one page, press
8
Place the next page on the scanner glass.
Set
Press .
The MFC starts scanning and returns to Step 7. (Repeat Step 7
and 8 for each additional page).

Fax Resolution

When you have an original in the ADF or on the scanner glass you
Resolution
can use the
this fax only). If it is not illuminated in green, press
Resolution
Press
want.
—OR—
You can change the default setting.
1
If it is not illuminated in green, press
2
Menu
Press
3
Press
resolution you want.
Set
Press .
4
Stop/Exit
Press
Standard: Suitable for most typed originals.
Good for small print and transmits a little slower than
Fine:
Standard resolution.
Good for small print or artwork and transmits slower
S.Fine:
than Fine resolution.
Use when the original has varying shades of gray.
Photo:
This has the slowest transmission time.
6 - 7 SETUP SEND
to send the fax from the ADF.
key to change the setting temporarily (for
repeatedly until the LCD shows the setting you
2 2 2
, , , .
or to select the
.
2 Start
(or press
1
and go to Step 8.
(
22.Setup Send
2.Fax Resolution
▲
Standard
▼
Fine
Select
again).
Fax
( ).
Fax
).
▲▼
& Set