Using Your Mfc With A Macintosh; Setting Up Your Usb-Equipped Apple Macintosh - Brother MFC-8440 User Manual

18
Using your MFC with a
Macintosh
Setting up your USB-equipped Apple
Macintosh
■
Before you can connect the MFC to your Macintosh
must buy a USB cable that is not longer than 6 feet (1.8
metres).
Do not connect the MFC to a USB port on a key board or
a non-powered USB hub.
■
Some descriptions in this chapter are based on the
MFC-8840D. These descriptions also apply to the
MFC-8440 and MFC-8840DN.
The features supported by the MFC will depend on the operating
system you are using. The chart below shows which features are
supported.
Feature
Printing
Scanning (TWAIN)
PC-FAX sending
Remote Setup
®
*1 For Mac OS
or greater. (For the latest information for Mac OS
http://solutions.brother.com)
®
®
Mac OS
8.6
Yes
Yes
Yes
No
X 10.2 users, please upgrade to Mac OS

USING YOUR MFC WITH A MACINTOSH

®
9.X 10.1
Yes Yes
Yes No
Yes Yes
No Yes
®
X, please visit at:
®
®
, you
®
Mac OS X
10.2.1
* 1
or greater
Yes
Yes
Yes
Yes
®
X 10.2.1
®
18 - 1