Brother MFC-8440 User Manual page 360

Brother mfc-8440: users manual

Hide thumbs Also See for MFC-8440:

Table of Contents

To prevent damage to the MFC caused by static electricity, do not

touch the electrodes shown in the following diagram.

Open the back output tray. Pull the jammed paper out of the

fuser unit. If the paper jam can be cleared, go to Step 7.

If you have to pull the paper toward the back of the MFC, the

fuser may get dirty with toner powder and it may scatter on the

next printouts. Print a few copies of the test page until the

scattering of toner stops.

TROUBLESHOOTING AND ROUTINE MAINTENANCE 22 - 8