Status Led Indications - Brother MFC-8440 User Manual

Status LED indications

The Status LED (Light Emitting Diode) will flash and change color
depending on the MFC status.
The LED indications shown in the table below are used in the
illustrations in this chapter.
LED
Green
Green
LED MFC status
Sleep Mode
Warming Up
Green
Ready
Green
Receiving Data
Yellow
Data Remaining in
Memory
Yellow
1 - 11 INTRODUCTION
Yellow Red
Yellow Red
Description
The power switch is off or the MFC is in Sleep
mode.
The MFC is warming up for printing.
The MFC is ready to print.
The MFC is either receiving data from the
computer, processing data in memory or
printing data.
Print data remains in the MFC memory.
LED status
LED is off.
LED is on.
LED is blinking.