Real Time Transmission - Brother MFC-8440 User Manual

Real Time Transmission

When you are sending a fax, the MFC will scan the originals into the
memory before sending. Then, as soon as the phone line is free, the
MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real
time (even if Real Time TX is set to Off ).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission. You can set Real Time
TX to On for all originals or for the next fax only.
If you want to fax multiple pages, use ADF.
1
If it is not illuminated in green, press
original face up in the ADF, or face down on the scanner glass.
2
Menu
Press
3
To change the default setting,
press
Off ).
Set
Press .
Go to Step 5.
—OR—
For the next fax transmission only, press
Next Fax Only .
Set
Press .
4
Press
Fax:Off ).
Set
Press .
5
1
Press if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
2
Press if you have finished choosing settings for this page, and
then go to Step 6.
6
Enter the fax number.
7
Start
Press
In Real Time Transmission using the scanner glass, the auto
redial function doesn't work.
2 2 5
, , , .
or to select On (or
or to select Next Fax:On (or Next
to send the fax.
Fax
( ). Place the
22.Setup Send
5.Real Time TX
▲
Next Fax Only
▼
On
▲▼
Select & Set
or
SETUP SEND 6 - 10
to select