Scan To Image - Brother MFC-8440 User Manual

Scan to Image

When you select Scan to Image your original will be scanned and
sent directly to the PC you designated on your network. The Brother
SmartUI will activate the default graphics application on the
designated PC. You can change the Scan configuration. (For
®
Windows 98/Me/2000: See Scan to Image on page 14-14.) (For
®
Windows XP: See Hardware Section: Changing the Scan to button
configuration on page 15-5 to 15-10.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press
3
Press
to Image .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The MFC will start the scanning process.
NETWORK SCANNING (WINDOWS
Scan
( ).
or to select Scan
or to select a
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 19 - 6
Scan
button. You
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File
▲▼
Select & Set