Brother MFC-8440 Setting Up The Machine
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. MFC-8440
  6. Setting up the machine
Brother MFC-8440 Setting Up The Machine

Brother MFC-8440 Setting Up The Machine

Hide thumbs Also See for MFC-8440:
Table of Contents

Advertisement

Quick Links

Download this manual
Step 1
Install the Automatic
1
Document Feed (ADF) Support
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the ADF cover.
2
Insert the tabs of ADF support into the holes
of the ADF one side at a time.
Tab
3
Push ADF Support down until it latches in place.
4
Close the ADF cover.
4
Setting Up the Machine
ADF Cover
Tab
Hole
ADF Support
Install the Drum Unit
2
Assembly
1
Open the front cover by pressing the front
cover release button.
Front Cover
2
Unpack the drum unit assembly.
Remove the protective part.
Protective Part
Front Cover
Release Button
Drum Unit
Assembly

Advertisement

Table of Contents
loading

Related Manuals for Brother MFC-8440

Summary of Contents for Brother MFC-8440

  • Page 1 Step 1 Setting Up the Machine Install the Automatic Install the Drum Unit Document Feed (ADF) Support Assembly Open the front cover by pressing the front Do NOT connect the interface cable. cover release button. Connecting the interface cable is done when installing the driver.

  • Page 2: Load Paper In The Paper Tray

    Load Paper in the Paper Tray Pull the paper tray completely out of the Rock it from side to side several times to machine. distribute the toner evenly inside the assembly. While pressing the paper guide release lever, slide the adjusters to fit the paper size. Push the drum unit assembly into the Check that the guides are firmly in the slots machine (until it snaps into place).

  • Page 3: Release The Scanner Lock

    Step 1 Setting Up the Machine Release the Scanner Lock Fan the stack of paper well to avoid paper Push the lever up to unlock the scanner. jams and misfeeds. (The gray scanner lock lever is located at the back left under side of the document cover.) Scanner Lock Lever Put paper in the paper tray.

  • Page 4: Install Power Cord And Phone Line

    Install Power Cord and Phone Line If you are sharing one phone line with an Do not connect the Parallel or USB external telephone, connect it as shown cable yet. below. Make sure that the power switch is off. Connect the AC power cord to the machine. Plug the AC power cord into an AC outlet.

  • Page 5: Selecting A Receive Mode

    Step 1 Setting Up the Machine MFC-8440, MFC-8840D and MFC-8840DN have similar control panel keys. Dial pad Stop/Exit Menu Selecting a Receive Mode Choose the Receive mode which best suits your Are you connecting an external telephone or external needs.

  • Page 6: Setting The Date And Time

    Setting the Date and Time The MFC displays the date and time, and prints it on Enter the two digits for the day on the dial every fax you send. pad, and then press the Set key. Press the Menu key. 02.Date/Time Press the key.

  • Page 7: Setting Your Station Id

    Step 1 Setting Up the Machine MFC-8440, MFC-8840D and MFC-8840DN have similar control panel keys. Dial pad Stop/Exit Menu Setting Your Station ID You should store your name and fax number to be Use the dial pad to enter your name (up to printed on all fax pages that you send.

  • Page 8: Sending In The Product Registration And Test Sheet (Usa Only)

    Selecting Your Sending in the Product Language (Canada Only) Registration and Test Sheet (USA Only) Press the Menu key. Fill out the Product Registration and Test Sheet. Press the key. Press the key. Select your language (ENGLISH or FRENCH) by using , and then press the Set key.

This manual is also suitable for:

Mfc-8840dMfc-8840dn

Table of Contents