Auto Dial Numbers And Dialing Options; Storing Numbers For Easy Dialing; Storing One-Touch Dial Numbers - Brother MFC-8440 User Manual

7
Auto Dial numbers and
dialing options

Storing numbers for easy dialing

You can set up your MFC to do three types of easy dialing:
One-Touch, Speed-Dial and Groups for Broadcasting faxes.
If you lose electrical power, the auto dial numbers that are in the
memory will not be lost.

Storing One-Touch Dial numbers

Your MFC has 20 One-Touch keys where you
can store 40 fax or phone numbers for
automatic dialing. To access numbers 21 to 40,
Shift
hold down
key. When you press a One-Touch key the LCD
shows the name, if you stored it, or the number. (See One-Touch
Dialing on page 7-5.)
One-Touch keys are the 20 keys (numbers 01–40) located on the left
side of the control panel.
(For USA only) The Brother fax back system number has been
preprogrammed on One-Touch key
1
Menu
Press
2
Press the One-Touch key where
you want to store a number.
If you have not installed the optional
LAN board (NC-9100h), go to Step 4.
—OR—
If you are using the MFC-8840DN or have installed the optional
LAN board (NC-9100h), the MFC will ask you if the One-Touch key
is for a fax/telephone number or an e-mail address. Go to Step 3.
3
Press
Fax/Tel .
Set
Press .
as you press the One-Touch
2 3 1
, , , .
or to select

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 1

1
.
23.Set Auto Dial
1.One-Touch Dial
One-Touch:
Select One-Touch
23.Set Auto Dial
*007
▲
Fax/Tel
▼
E-Address
▲▼
Select & Set