Setting the Tray Use for Fax mode
(MFC-5840CN only)
The MFC uses the paper in Tray#1 first. You can change the default
tray that will be used for printing received faxes.
1
Menu/Set
Press
2
Press
or
▲
▼
Tray#2 Only , or Auto Select .
Menu/Set
Press
3
Stop/Exit
Press
■
Auto Select will allow your MFC to take paper from
Tray#2:
• If Tray#1 is out of paper.
• When it is set up with a different paper size that is more
suitable for the received faxes.
• When both trays are using the same size paper and
Tray#1 is not set to use plain paper.
■
You can only use plain paper sizes Letter, Legal or A4 in
Tray#2.
2 - 8 GETTING STARTED
1
9
,
,
.
to select Tray#1 Only ,
.
.
General Setup
9.Tray Use:Fax