Changing One-Touch And Speed-Dial Numbers - Brother MFC-8440 User Manual

4
Enter the phone or fax number (up to 20 digits).
Set
Press .
5
Use the dial pad to enter the name (up to 15 characters).
Set
Press .
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Set
Press
6
Go to Step 2 to store another Speed-Dial number.
—OR—
Stop/Exit
Press

Changing One-Touch and Speed-Dial numbers

If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
1
Press to change the stored
number.
—OR—
2
Press to exit without making a
change.
2
Enter a new number.
Set
Press .
■
To erase the whole number or whole name, press
Clear/Black
To erase one digit or letter, use
cursor under it, and then press
■
If you want to insert characters, use
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 4 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers.(See Storing
One-Touch Dial numbers on page 7-1 and Storing Speed-Dial
numbers on page 7-2.)
to store the number without a name.
.
repeatedly until all digits or letters are deleted.
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 3
23.Set Auto Dial
*005:MIKE
▲
1.Change
▼
2.Exit
▲▼
Select
or to position the
Clear/Black
.
or to position the
& Set