Setting Up Polled Transmission - Brother MFC-8440 User Manual

Setting up Polled Transmission

Polled Transmission is when you set up your MFC to wait with a
paper original so another fax machine can call and retrieve it.
1
If it is not illuminated in green, press
original that is going to be retrieved face up in the ADF, or face
down on the scanner glass.
2
Menu
Press
3
Press
(or Off ).
Set
Press .
4
1
Press if you want to choose more
settings and the LCD will return to the Setup Send menu.
—OR—
2
Press if you have finished choosing settings, and go to step 5.
5
Start
Press
6
If you place the original in the ADF, wait for the fax to be polled.
—OR—
If you are using the scanner glass, go to Step 7.
7
To send a single page, press
the fax to be polled.
—OR—
To send more than one page, press
8
Place the next page on the scanner glass.
Set
Press .
The MFC starts scanning and returns to Step 7. (Repeat Step 7
and 8 for each additional page).
The document will be stored and can be retrieved from any other
fax machine until you delete the fax in memory by using the
Cancelling a Job function. (See Canceling a scheduled job on
page 6-11.)
6 - 21 SETUP SEND
2 2 6
, , , .
or to choose On
. The MFC starts scanning the document.
(
22.Setup Send
6.Polled TX
▲
On
▼
Off
Select
2 Start
(or press
1
and go to Step 8.
Fax
). Place the
▲▼
& Set
again), wait for