Scan To File - Brother MFC-8440 User Manual

Scan to File

When you select Scan to File you can scan a black and white or color
original and send it directly to a PC you designate on your network. The
file will be saved in the folder and file format that you have configured in
the Brother SmartUI on the designated PC. You can change the Scan
configuration.
®
(For Windows
®
(For Windows
button configuration on page 15-5 to 15-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press
3
Press
to File .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The MFC will start the scanning process.
Max. 25 clients can be connected to one MFC on a Network. For
example, if 30 clients try to connect at a time, 5 clients will not
be shown on the LCD.
NETWORK SCANNING (WINDOWS
98/Me/2000: See Scan to File on page 14-8 to 14-9.)
XP: See Hardware Section: Changing the Scan to
Scan
( ).
or to select Scan
or to select a
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 19 - 8
Scan
button. You
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File
▲▼
Select & Set