Using The Scan Key (For Usb Or Parallel Interface Cable Users) - Brother MFC-8440 User Manual

Using the scan key (For USB or
Parallel interface cable users)
You can use
into your word processing, graphics or E-mail applications or your
computer folder. The advantage of using
avoid the mouse clicks required to scan from your computer.
For Scan to E-mail, Scan to Image, Scan to OCR and Scan
to File
Before you can use
must have connected the MFC to your Windows
computer and loaded the appropriate Brother Drivers for your
version of Windows
When you are ready to use
Brother Control Center application is running on your computer.
For details about how to configure the Brother Control Center
buttons to launch the application of your choice using
Scan
( ), go to the appropriate chapter:
■
For Windows
Windows NT
for Windows
®
NT WS 4.0 on page 14-1.
■
For Windows
SmartUI Control Center on page 15-1.
■
If your MFC is connected with both a USB and a Parallel
cable, you need to select USB or Parallel as the destination
in each step.
Scan
( ) on the control panel to scan originals
Scan
(
®
.
®
98/98SE/Me/2000 Professional and
®
WS 4.0, see Using the Brother Control Center
®
98/98SE/Me/2000 Professional and Windows
®
XP, see Using the Windows
HOW TO SCAN USING WINDOWS
Scan
(
) on the control panel, you
®
based
Scan
( ), make sure the
®
-Based Brother
) is that you
®
13 - 16