Test Switch; Paper Tray #2 - Brother MFC-8440 User Manual

Active LED is yellow:
The Active LED will blink if the print server is receiving or transmitting data.
If there is a valid connection to the network, the LED will blink
orange or green.

TEST SWITCH

Short push: Prints the network configuration page.
Long push (more than 5 seconds): Reset the network configuration
back to the factory default settings.
To set up the MFC on the Network, see the NC-9100h Network
User's Guide on the CD-ROM.

Paper Tray #2

You can purchase the Paper Tray #2 accessory (LT-5000) to use as a
third paper source. Tray #2 holds up to 250 sheets of 20 lb (80 g/m
paper.
Paper Tray #2
Basis Weight
Moisture Content
We Recommend:
Cut sheet:
Holds approx. 250 sheets of 20 lb (80 g/m
16 to 28 lb (60 to 105 g/m
4% to 6% by weight
Xerox 4200 DP 20 lb
Hammermill Laser Paper 24 lb
2
)
OPTIONAL ACCESSORIES 23 - 9
Test Switch
LED
Ethernet
RJ-45
LED
2
)
2
)