Brother MFC-8440 User Manual page 355

ERROR MESSAGES
ERROR CAUSE
MESSAGE
You can't store data in the memory.
Out Of Memory
The number you dialed does not answer or is
No
busy.
Response/Busy
You tried to access a One-Touch or
Not
Speed-Dial number that is not programmed.
Registered
A page, piece of paper or paper clip, etc. may
Pls Open
be jammed inside the MFC.
Cover
You tried to make duplex printing with duplex
No DX Tray
cover open.
22 - 3 TROUBLESHOOTING AND ROUTINE MAINTENANCE
ACTION
(Fax sending in process)
Press Stop and wait until the other
operations in progress finish and
then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
(Copy operation in process)
Press Stop and wait until the other
operations in process finish and
then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
—OR—
Add an optional memory. (See
Memory board on page 23-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality on page 12-5.)
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-5.)
—OR—
Add an optional memory. (See
Memory board on page 23-1.)
Verify the number and try again.
Set up the One-Touch or Speed-Dial
number. (See Storing One-Touch
Dial numbers on page 7-1 and
Storing Speed-Dial numbers on
page 7-2.)
Open the front cover. If you see any
jammed paper or other item, gently
pull it out, then close the front cover.
If the error message remains, open
and close the front cover again.
If the MFC cannot reset itself and
return to the date and time prompt, it
will display Machine Error XX.
Please call Brother Customer
Service and tell them the Machine
Error number:
In USA: 1-800-284-4329
In Canada: 1-877-BROTHER
Install the duplex tray correctly. (See
Paper is jammed in the duplex tray
(For MFC-8840D and
MFC-8840DN) on page 22-11.)