Using The Scan Key (For Usb Or Parallel Cable Users) - Brother DCP-8060 Software User's Manual

Using the Scan key
(For USB or Parallel cable users)
Note
If you use the Scan key when connected on a network, see Using the Scan key (For models that support
duplex scanning) on page 78.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your PC. The advantage of using
mouse clicks needed to scan from your PC.
Before you can use
connect the machine to your PC. If you installed the MFL-Pro Suite from the included CD-ROM then the
correct drivers and ControlCenter2 are installed. Scanning by
Device Button tab of ControlCenter2. (See SCAN on page 59.) For details about how to configure the scan
settings of the ControlCenter2 buttons and to launch the application of your choice using
Using ControlCenter2 on page 55.
(For models that support duplex scanning)
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
Choose your document layout from the following table:
Portrait
Front
Front
(Scan) on the control panel, you have to install the Brother MFL-Pro suite and
Back Front
Back Front
Document Layout Table
(Scan) is that you avoid the
(Scan) follows the configuration on
Landscape
Back
Back
2.
2
(Scan), see
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
51