Using The Scan Key (For Usb Or Parallel Cable Users); Scan To E-Mail - Brother DCP-7010L Software User's Manual

®
How to scan using Windows

Using the Scan key (For USB or Parallel cable users)

Note
If you use the Scan key on a network, please refer to Using the Scan key on page 6-3.
You can use the Scan key on the control panel to scan
documents into your word processing, graphics or
E-mail applications or your computer folder. The
advantage of using Scan is that you avoid the mouse
clicks required to scan from your computer.
Note
■
Before you can use the Scan key on the control panel, you must have connected the machine to your
®
Windows based computer and loaded the appropriate Brother Drivers for your version of Windows
For details about how to configure the ControlCenter2.0 buttons to launch the application of your choice
using the Scan key, go to the appropriate chapter:
®
• For Windows , see Using ControlCenter2.0 (For Windows
®
• For Macintosh , see Using ControlCenter2.0 (For Mac OS

Scan to E-mail

You can either scan a black and white document (or colour document for the DCP-7010L, DCP-7025,
MFC-7420 and MFC-7820N) into your E-mail application as a file attachment. You can change the Scan
configuration. (See E-mail on page 3-5.)
1
Load your document.
2
Press Scan.
3
Press ▲ or ▼ to select Scan to E-mail.
Press Menu/Set or Set.
The machine will scan the document, create a file attachment, and launch your E-mail application,
displaying the new message waiting to be addressed.
MFC-7225N, MFC-7420,
DCP-7010L, DCP-7025
MFC-7820N
®
) on page 3-1.
®
X 10.2.4 or greater) on page 7-24.
2
®
.
2 - 13