Displaying the
Power System
Statistics Using
the CLI
Cajun P550/P880/P882 Switch User Guide
Figure 3-8. Power System Window
2. Refer to Table 3-3 and review the Power System dialog box
parameters:
Table 3-3. Power System Dialog Box Parameters
Parameter
Power Supply
Status
Type
Total System Power
Current Power Available
* Note: You will only see 600W of available power displayed in
the Total System Power field even if you have three
power supplies installed. The switch only uses power
from two of the three power supplies. The third power
supply is a redundant power supply and is used only if
one of the other power supplies fails.
To display your switch's power system statistics using the CLI, enter
the following command from the Priv mode:
> show system power
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring System Information
Definition
Identifies the power supply
indicates whether the power supply is
detected.
Describes the type of power supply
detected.
Displays the total system power in Watts.
Displays the current power available.
3-15