Regaining Configuration Access To The Ppp Serial Port Con- Sole; Configuring Dial-Up Networking - Avaya Cajun P550R User Manual

Chapter 2
Regaining
Configuration
Access to the
PPP Serial Port
Console

Configuring Dial-Up Networking

2-22
If you incorrectly configure the PPP serial port console, you cannot
regain configuration access to the web agent or the CLI. This is a
temporary situation and can corrected.
To regain configuration access to the Web Agent or the CLI when
the console port is in PPP mode:
1. Enter TTY in the console window. The CLI login prompt
displays. It may be necessary to press Enter several times to
see the login prompt. You may see the modem init command
string.
2. Enter your user name at the Login prompt. The password
prompt displays.
3. Enter your password at the Password prompt. The Cajun CLI
prompt displays.
4. Enter the PPP configuration commands necessary to start PPP.
Refer to the Cajun™ P550/P220 Command Line Interface
Reference Guide for information about the PPP configuration
commands.
5. Enter exit at the CLI prompt after you complete your
configuration settings to reinvoke the modem control
software and exit CLI mode.
* Note: You do not need to exit from CLI if the serial
port console has been configured as a TTY
console, or if you do not intend to re-attempt
connecting using PPP.
To configure your PC for dial-up networking with a PPP serial port
console:
1. Open My Computer on your PC.
2. Double-click Dial-Up Networking. The Dial-Up Networking
window opens.
* Note: You must have dial-up networking installed on
your PC.
3. Double-click Make New Connection to configure your
modem. The Make New Connection wizard opens.
Cajun P550/P880/P882 Switch User Guide