Setting Up Snmp Communities Using The Cli - Avaya Cajun P550R User Manual

Chapter 2
Option
normal
admin
Setting Up
SNMP
Communities
Using the CLI
2-14
Table 2-3. Access Level Field Optionscontinued
Access Level Manager Can...
Read-Write with View and set all switch
Security Level
parameters, including
Set to admin
community table.
None Disable a string without
deleting it.
6. Select a security level from the Security Level pull-down
menu (refer to Table 2-4).
Table 2-4. Security Level Field Options
Allows Access to...
All switch configuration and reporting functions.
All switch configuration and reporting functions, including
access to community configuration.
7. Select Enable from the Trap Receiver field pull-down menu.
Disable is the default
* Note: Select Enable only if you selected Specific from
the IP Address field.
8. Click APPLY to save your changes, or CANCEL to clear your
selection.
* Note: If you click Apply, the changes are saved in the
Running config only. The Startup config has not
changed. Therefore, these and other changes
will be lost if your switch goes down or if you
power it off.
To save these changes, you must copy the
Running config as the Startup configuration.
Refer to the section "Copying Configuration
Files" section later in this chapter.
To set the SNMP communities parameters using the CLI, enter the
following command:
> snmp-server community <string>{ro|rw |none}[{normal| admin}]
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Manager
Cannot...
N/A
Access any switch
features.
Cajun P550/P880/P882 Switch User Guide