Displaying The Power System Statistics - Avaya P580 User Manual

CLI Command

Displaying the Power System Statistics

Web Agent
Procedure
Document No. 650-100-700, Issue 1
To check the temperature status, use the show temperature CLI command.
To set the temperature thresholds, use the following CLI commands:
(configure)# set temperature {supervisor-slot | backplane-
sensor | cpu-sensor | probe} shutdown <temperature>
(configure)# set temperature {supervisor-slot | backplane-
sensor | cpu-sensor | probe} warning {upper | lower | low-limit}
<temperature>
You can display the statistics for your switch's power system from the either
the Web Agent and the CLI.
To display your switch's power system statistics using the Web Agent:
1. Select Power System from the System > Configuration group on the
Web Agent window. The Power System dialog box opens with your
switch's current power statistics
Figure 3-8. Power System Window
Configuring System Information
(Figure 3-8).
3-13