Disabling Spanning Tree Mode On A Port Using The Cli; Switch Port Configuration Dialog Box - Avaya Cajun P550R User Manual

Avaya p550r: user guide

Hide thumbs Also See for Cajun P550R:

Table of Contents

Spanning Tree

Mode on a Port

Using the CLI

Cajun P550/P880/P882 Switch User Guide

Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping

Figure 4-12. Switch Port Configuration Dialog Box

4. Select Disable from the Spanning Tree Mode pull-down

5. Click APPLY to disable spanning tree mode on the port, or

CANCEL to keep spanning tree mode Enabled on the port.

To Disable Spanning Tree mode on a port using the CLI, enter the

following command from Configure mode:

> set port spanning-tree-mode <mod-num> disable

Refer to the Cajun™ P550™/P880/P882 Command Line Interface

Reference Guide for Version 5.0 for details about this command.

Cajun p880 Cajun p882