Configuring Port Vlan Parameters Using The Cli - Avaya Cajun P550R User Manual

Chapter 5
Option
Static
Bind to All
Bind to Received
Configuring
Port VLAN
Parameters
Using the CLI
5-34
5. Select Enable from the Automatic VLAN Creation field pull-
down menu. This automatically creates a VLAN each time the
port receives a frame from an unknown VLAN.
*Note: This feature does not create entries in 3Com
Mapping Tables. Refer to Creating 3Com Mapping
Tables, in Chapter 11, for more information.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Table 5-5 describes the VLAN Binding field pull-down menu
options.
Table 5-8. VLAN Binding Field Pull-Down Menu Options
Definition
Assigns VLAN membership manually, using the VLAN Switch
Ports page described in "Creating and Implementing VLANs", in
Chapter 11.
Binds this port to all VLANs known to the switch. This is an
appropriate mode for switch-to-switch connections.
When a tagged IEEE 802.1Q packet arrives on a port
Note:
that is set to bind to all and the VLAN does not exist on
the switch, the packet is forwarded on to the VLAN
assigned to the port default VLAN for that port. To
prevent unintended forwarding of unknown VLAN
traffic to the port's default VLAN, configure the port
default VLAN to Discard. The automatic VLAN creation
feature will not work if the port's default VLAN is the
discard VLAN, because the switch does not learn for this
VLAN.
if you use 3Com Mapping Tables, this setting is ignored.
Binds this port to any VLAN it receives traffic from.
Note: If Automatic VLAN Creation is enabled, the port binds to
previously unknown VLANs and a VLAN entry is added
to the switch VLAN table. If Automatic VLAN Creation is
disabled, the port does not bind to any VLAN unknown
to the switch.
To configure port VLAN parameters using the CLI, enter the
following command from Configure mode:
Cajun(configure)# set port vlan <options>
Refer to the Cajun P500/P880/P882 Switch Command Line Interface
Reference Guide for more details about this command.
Cajun P550/P880/P882 Switch User Guide