Creating Hunt Groups Using The Cli; Hunt Group Configuration Dialog Box; Create Hunt Group Dialog Box - Avaya Cajun P550R User Manual

Chapter 4
Creating Hunt
Groups Using
the CLI
4-28
Figure 4-18. Hunt Group Configuration Dialog Box.
7. Select CREATE. The Create Hunt Group dialog box opens
(Figure 4-19).
Figure 4-19. Create Hunt Group Dialog Box.
8. Enter a name for the hunt group in the Name field,.
9. Select Enable from the Load Sharing pull-down menu to
enable the Hunt Group.
10. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To create a hunt group using the CLI, enter the following command
from Configure mode:
> set huntgroup <huntgroup-name>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Cajun P550/P880/P882 Switch User Guide