Performing a Reset
Performing a
Reset Using the
Web Agent
Performing a
Reset Using the
CLI
Cajun P550/P880/P882 Switch User Guide
You can reset your switch from either the web agent or the CLI.
To reset your switch using the web agent:
1. Select System Reset from the System group on the web agent
window. The System Reset Page dialog box opens (Figure 3-
10).
Figure 3-10. System Reset Page Window
2. Select Save to save your Running Configuration
(Running-Config to the startup configuration
(Startup-Config before performing a system reset.
* Note: If you do not save your you Running-Config to
Startup-Config before you reset the switch, you
will lose all of the modifications you made.
3. Click YES to reset the switch, or NO to cancel the operation.
To reset your switch using the CLI, enter the following command
from Priv mode:
> reset
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring System Information
3-17