Managing Configuration Files; Viewing Your Running Configuration; Viewing Your Startup Configuration - Avaya Cajun P550R User Manual

Managing Configuration Files

Viewing Your Running Configuration

Viewing Your Startup Configuration

Cajun P550/P880/P882 Switch User Guide
Initialize and Setup of the P550/P880/P882 Switch
You can manage the files that contain the configuration data for
your Cajun switch from either the web agent or the CLI. When you
first install the switch, or upgrade from a previous installation, your
configuration parameters are stored in a startup.txt file located in
the switch's Non-Volatile Random Access Memory (NVRAM). When
the switch is restarted, the startup.txt file runs and stores
configuration parameters in volatile RAM as a running
configuration.
Any changes you make to the switch configuration are
automatically recorded in RAM, but not in NVRAM. When you
want to retain your current configuration, you must manually save
it to NVRAM through the web agent or the CLI.
For information about how to save your running configuration file
to your startup configuration, refer to the "Copying the Running
Configuration to the Startup Configuration Using the Web Agent",
section later in this chapter. Always view and compare your running
and startup configuration files to determine changes that you made
to your running configuration.
To view your running configuration:
Select Running Config from the Configuration Management
group on the web agent window. The Running Configuration
displays
Or
Enter show running-config in priv.mode from the CLI.
To view your startup configuration:
Select Startup Config from the Configuration Management
group on the web agent window. The Startup Configuration
displays
Or
Enter show startup-config in priv.mode from the CLI.
2-25