Chapter 4
4-34
4. Select the port in the Name column on which you want to
enable VTP Snooping throughout the switch. The Switch Port
Configuration window opens for that port
(see Figure 4-25).
Figure 4-25. Switch Port Configuration Window with VTP
5. Select either IEEE 802.1Q or Multi-layer from the Trunk
Mode pull-down menu to match the setting of the trunk
mode for the switch port at the other end of the link.
6. Select Enable from the VTP Snooping pull-down menu. This
enables VTP snooping on the switch.
7. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Options
Cajun P550/P880/P882 Switch User Guide