Chapter 4
4-12
Figure 4-7. Spanning Tree Bridge Configuration Dialog Box
5. Refer to Table 4-4 to configure the Spanning Tree Bridge
Configuration parameters:
Table 4-4. Spanning Tree Bridge Configuration Parameters
Parameter
Definition
Mode
Determines whether spanning tree is enabled or
disabled for this bridge.
Priority
STP Priority level for this bridge.
Bridge Max Age
Sets the maximum amount of time that this bridge
retains bridging information before discarding. When
the maximum age expires, the bridge assumes it has
lost connection to the network, and sends out
requests to be re-added to the spanning tree.
Bridge Hello
Time between generation of BPDUs by the root
Time
bridge.
Bridge Forward
Amount of delay used when a port transitions to the
Delay
forwarding state. Set by the root bridge for the
segment.
Note:
Max Age
Current maximum age for this spanning tree.
Determined by the root bridge.
Hello Time
Current hello time for this spanning tree.
Determined by the root bridge.
Forward Delay
Current forwarding delay for this spanning tree. Set
by the root bridge.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
You must enter a value within the supported
range or the configuration operation will fail.
The supported value range for this parameter
is 10-30.
Cajun P550/P880/P882 Switch User Guide