Operating The Kodak Driver; Set The Film Type; Set The Film Size; Prescan The Image (And Calibrate The Scanner) - Kodak RFS 3570 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating the KODAK Driver

Follow the steps in this section to use the controls on the KODAK Driver
window.
NOTE: As you use the Scanner, the settings you have in effect each time you
leave the KODAK Driver are retained and will be in effect the next time you use
the driver.

Set the Film Type

1. Set the film type to match your film by choosing the film type from the
large number of choices on the F

Set the Film Size

2. If the F
correct size from the F

PreScan the Image (and Calibrate the Scanner)

3. Click P
step, a color image of the photo currently in position will appear in
the KODAK Driver window. You can use this image to determine
whether additional adjustments are needed before final scanning. If
B & W is on (see below), the prescan appears in black-and-white.
S does not match the film you will scan, choose the
ILM IZE
S
ILM IZE
S . When you have completed parts A through E of this
RE CAN
©
Using KODAK Drivers with Windows Applications — PC
drop down list box.
ILM
drop down list box.
G
9-7