Kodak RFS 3570 User Manual page 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Locate the two identical SCSI ports and thin wire clamps on the back
of the Scanner.
3. Determine if the connected SCSI devices are terminated or not. The
Scanner is a non-terminated SCSI device. To do so:
A. First look for an external SCSI terminator on the devices; if you
B. Because some devices contain internal terminators, also check
©
3-10 Installation (Hardware & Software) — Macintosh Computer
BACK OF FILM SCANNER
2
Two Identical SCSI Ports
find one, remove it.
the instructions for your devices to determine if they are termi-
nated internally.
NOTE: The Scanner does not have an internal terminator.
Thin Wire Clamps
SCSI ID
Serial Number
-
3570
3
G