Kodak RFS 3570 User Manual page 78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
time while working with the scanner, clean the scanner "diffuser" (a
3 x 4-inch piece of white plastic), as summarized in this note, and as fully
described at the end of "Appendix C — Troubleshooting."
A. Remove the calibration mask and single frame holder adapter or multi-
B. Orient the dust removal tool as shown below, and with an up and down
C. Remove the dust tool, replace the mask and holder, and rescan the
D. If the problem continues, use the scanner software R
©
5-22 Using the KODAK Driver for Adobe Photoshop (Macintosh)
frame holder.
motion, clean the surface of the diffuser making sure the fiber strip makes
contact with the diffuser.
Dust removal tool
Fiber strip
Diffuser
KODAK Professional
RFS 3570 Film Scanner
image.
described in "Appendix C — Troubleshooting."
THIS SIDE
TOWARD FRONT
OF MACHINE
ECALIBRATE
G
button as